C. Christophe, C. S. , and M. , David CADOUX research engineer and head of the Laboratory Pipes, Fluids and Materials at C.S.T.B. References

P. Bardonnet, Résines époxydes (EP) -Composants et propriétés, Traité plastiques et composites, éditions T.I. (Techniques de l'ingénieur, 1992.

F. Hugenchmidt, New experiences with epoxies for structural applications, Int J Adhes Adhes, vol.2, issue.2, pp.84-95, 1982.

D. Van-gemart, Force transfer in epoxy bonded steel/concrete joints, Int Adhes Adhes, vol.1, issue.2, pp.67-72, 1980.

N. Pinoteau, P. Pimienta, T. Guillet, P. Rivillion, and S. Rémond, Effect of heating rate on bond failure of rebars into concrete using polymer adhesives to simulate exposure to fire, Int Adhes Adhes, vol.31, issue.8, pp.851-861, 2011.

H. Sato, K. Fujikake, and S. Mindess, Study on dynamic pullout strength of anchors based on failure modes, 13th World Conference on Earthquake Engineering, vol.854, 2004.

B. C. Vancouver and . Canada,

L. Bouazaoui and A. Li, Analysis of steel/concrete interfacial shear stress by means of pull out test, International Journal of Adhesion and Adhesives, vol.28, issue.3, pp.101-108, 2008.
URL : https://hal.archives-ouvertes.fr/hal-02061546

E. Nigro, A. Bilotta, G. Cefarelli, G. Manfredi, and E. Cosenza, Performance under fire situations of concrete members reinforced with FRP rods: Bond models and design nomograms, Jornal of composites for construction, vol.16, issue.4, pp.395-406, 2012.

Y. Matsuzaki, Ultimate Resistance of Anchor Bolts Installed in Concrete Members, Concrete Journal, vol.22, issue.7, pp.54-61, 1984.

K. D. Zavliaris, S. Kollias, and P. R. Speare, An experimental study of adhesively bonded anchorages in concrete, vol.48, pp.79-93, 1996.

A. Colak, Parametric study of factors affecting the pull-out strength of steel rods bonded into precast concrete panels, Int Adhes Adhes, vol.21, issue.6, pp.489-493, 2001.

A. Colak, Estimation of ultimate tension load of methylmethacrylate bonded steel rods into concrete, Int Adhes Adhes, vol.27, issue.8, pp.653-660, 2007.

R. Eligehausen and F. Werner, Recent Developments and Open Problems in Fastening Technique, 2nd International Symposium on Connections between Steel and Concrete, 2007.

C. Higgins and R. Klingner, Effect of environmental exposure on the performance of cast-inplace and retrofit anchors in concrete, ACI Struct J, vol.95, issue.5, pp.506-517, 1998.

R. Cook and R. Konz, Factors influencing bond strength of adhesive anchors, ACI Struc J, vol.98, issue.1, pp.76-86, 2001.

C. Tavares, M. Ribeiro, A. Ferreira, and R. Guedes, Creep behaviour of FRP-reinforced polymer concrete, Composite Structures, vol.57, pp.47-51, 2002.

O. Elalaoui, E. Ghorbel, V. Mighot, and M. Ben-ouezdou, Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250°C, Construction and Building Materials, vol.27, pp.415-425, 2012.

J. Reis, Effect of Temperature on the Mechanical Properties of Polymer Mortars, Materials Research, vol.15, issue.4, pp.645-649, 2012.

R. Letsch, Behaviour of polymers and polymer mortars at constant and changing temperatures, Proceedings of the 10th International Congress on Polymers in Concrete, 2001.

R. Letsch, Durability of Construction Materials: from materials science to construction materials engineering, Proceedings of First International Congress of RILEM, pp.1107-1114, 1987.

, CFA Guidance Note: Fixings and Fire, 1998.

, EN 1991-1-2. Eurocode 1, Part 1-2: Actions on structures: general actions -actions on the structures exposed to fire, 2002.

H. Spieth, J. Ozbolt, R. Eligehausen, and J. , Numerical and Experimental Analysis of postinstalled rebar spiced with cast-in rebars, Proc. of 2nd Int. Symp. on Connection between Steel and Concrete, pp.889-898, 2007.

, EN 1992-1-2 Eurocode 2. Part 1-2: Design of concrete structures -General rulesStructural fire design, 2005.

G. Muciaccia, A. Consiglio, and G. Rosati, Behavior and Design of Post-Installed Rebar Connections under Temperature, Key Engineering Materials, vol.711, pp.783-790, 2016.

, EAD 330087-00-0601, Systems for post-installed rebar connections with mortar, 2015.

R. Carbas, L. Silva, and G. Critchlow, Adhesively bonded functionnally graded joints by induction heating, International Journal of Adhesion and Adhesives, vol.48, pp.110-118, 2014.

V. Mazurin, Problems of Compatibility of the Values of Glass Transition Temperatures Published in the World Literature, Glass Physics and Chemistry, vol.33, issue.1, pp.22-36, 2007.

N. Pinoteau, , 2013.

P. Chua and M. Piggott, The Glass Fiber-Polymer Interface: I-Theoretical Consideration for Single Fiber Pull-out Tests, Composites Science and Technology, vol.22, pp.33-42, 1985.

R. Tipireddy and S. Kumar, International Journal aof Adhesion and Adhesives, 2017.

P. Upadhyaya and S. Kumar, Pull-out capacity of adhesive anchors: An analytical solution, International Journal of Adhesion and Adhesives, vol.60, pp.54-62, 2015.

P. Lawrence, Some Theoretical Considerations of Fibre Pull-out from Elastic Matrix, Journal of Material Science, vol.7, pp.1-6, 1972.

S. Kumar and M. Khan, A shear-lag model for functionally graded adhesive anchors, Adhesion & adhesives, vol.68, pp.317-325, 2016.