R. Cook, Behavior of chemically bonded anchors, J Struct Eng, vol.119, issue.9, pp.2744-62, 1993.

S. Kumar, Analysis of tabular adhesive joints with a functionnally modulus graded bondline subjected to axial loads, Int J Adhes Adhes, vol.29, pp.785-95, 2009.

. Aci-committee-318, Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary, pp.503-505, 2011.

R. Eligehausen and F. Werner, Recent developments and open problems in fastening technique, nd international symposium on connections between steel and concrete, 2007.

J. Petit, V. Nassiet, and Y. Baziard, Etude de la durabilité des assemblages collés. Techniques de l'ingénieur, p.160, 2005.

Y. Zhang, G. Lou, K. Chen, and G. Li, Residual strength of organic anchorage adhesive for post-installed rebar at elevated temperatures and after heating, Fire Technol J, vol.52, pp.877-95, 2016.

G. Muciaccia, D. D. Navarrete, N. Pinoteau, and R. Mege, Effects of different test apparati and heating procedures on the bond properties of post-installed rebar connections under elevated temperatures, vol.52, p.47, 2019.

J. Reis, Effect of temperature on the mechanical properties of polymer mortars, Mater Res, vol.15, issue.4, pp.645-654, 2012.

, Eurocode 3: Design of steel structures -Part 1-2: General rules -Structural fire design, 1993.

, EN 1992-1-2. Eurocode 2: Design of concrete structures -Part 1-2: General rules -Structural fire design, 2008.

, Building code requirements for reinforced concrete, 2014.

U. Sorathia, R. Lyon, R. Gann, and L. Gritzo, Materials and fire threat, Fire Technol J, vol.33, issue.3, pp.260-75, 1997.

M. Ribeiro, P. Nóvoa, A. Ferreira, and A. T. Marques, Flexural performance of polyester and epoxy polymer mortars under severe thermal conditions, Cem Compos, vol.26, pp.803-812, 2004.

M. Frigione, M. Aiello, and C. Naddeo, Water effects on the bond strength of concrete/ concrete adhesive joints, Constr Build Mater, vol.20, pp.957-70, 2006.

N. Pinoteau, P. Pimienta, T. Guillet, R. Rivillon, and S. Remond, Effect of heat on the adhesion between post-installed bars and concrete using polymeric mortars, Concrete 2012 -Bond in New Materials and under Severe Conditions, pp.573-580, 2012.

M. A. Lahouar, J. Caron, N. Pinoteau, G. Forêt, and K. Benzarti, Mechanical behavior of adhesive anchors under high temperature exposure: experimental investigation, Int J Adhes Adhes, vol.78, pp.200-211, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01617317

R. Adams, J. Coppendale, V. Mallick, and H. Al-hamdan, The effect of temperature on the strength of adhesive joints, Int J Adhes Adhes, vol.12, issue.3, pp.185-90, 1992.

N. Pinoteau, J. Heck, R. Avenel, P. Pimienta, T. Guillet et al., Prediction of failure of a cantilever-wall connection using post-installed rebars under thermal loading, Eng Struct, vol.56, pp.1607-1626, 2013.

. Eota-tr-020, Evaluation of anchorages in concrete concerning resistance to fire. European Organization for Technical Approvals, 2005.

R. Eligehausen, R. Mallée, and J. F. Silva, Anchorage in concrete construction, 2006.

M. Reichert and C. Thiele, Qualification of bonded anchors in case of fire, Proceedings of the 3 rd international symposium on connections between steel and concrete, pp.1191-1200, 2017.

H. Lakhani and J. Hofmann, A numerical method to evaluate the pull-out strength of bonded anchors under fire, Proceedings of the 3 rd international symposium on Connections between Steel and Concrete, pp.1179-90, 2017.

, ISO 834-1 International Standard. Fire-resistance tests -Elements of building construction -Part 1: General requirements, 1999.

O. Al-mansouri, R. Mege, N. Pinoteau, T. Guillet, and S. Rémond, Influence of testing conditions on thermal distribution and resulting load-bearing capacity of bonded anchors under fire, Eng Struct J, vol.192, pp.190-204, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02479085

M. A. Lahouar, N. Pinoteau, J. Caron, G. Forêt, and R. Mège, A nonlinear shear-lag model applied to chemical anchors subjected to a temperature distribution, Int J Adhe Adhes, vol.84, pp.438-50, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02309896

M. A. Lahouar, N. Pinoteau, J. Caron, R. Forêt, and . Ph, Fire design of post-installed rebars: full-scale validation test on a 2.94 × 2 × 0.15 m3 concrete slab subjected to ISO 834-1 fire, Eng Struct J, vol.174, pp.81-94, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02309912

H. Lakhani and J. Hofmann, On the pull-out capacity of post-installed bonded anchors and rebars during fire, Proceedings of the 10 th International Conference on Structures in Fire, pp.165-71, 2018.

G. Muciaccia, A. Consiglio, and G. Rosati, Behavior and design of post installed rebar connections under temperature, Key Engineering Materials, vol.711, pp.783-790, 2016.

M. A. Lahouar, N. Pinoteau, J. Caron, G. Forêt, T. Guillet et al., Chemically-bonded post-installed steel rebars in a full scale slab-wall connection subjected to the standard fire (ISO 834-1), Proceedings of the 3 rd international symposium on connections between steel and concrete, pp.1119-1149, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01617391

K. Tian, J. O?bolt, A. Sharma, and J. Hofmann, Experimental study on concrete edge failure of single headed stud anchors after fire exposure, Fire Safety J, vol.96, pp.176-88, 2018.

J. Bosnjak, A. Sharma, and J. O?bolt, Modelling bond between reinforcement and concrete after exposure to fire, 5 th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures

V. Halvi?ka and É. Lublóy, Concrete cone failure of bonded anchors in thermally damaged concrete, Construction Build. Mater. J, vol.171, pp.588-97, 2018.

. Eota and . Ead, Systems for post-installed rebar connections with mortar, 2015.